Ubiquiti POE-48-24W-G PoE Injector, 48VDC, 24W, Gbit
€18.04
Enquire about delivery
Product "Ubiquiti POE-48-24W-G PoE Injector, 48VDC, 24W, Gbit"
A PoE injector puts 48 V onto the network cable, so a camera or access point gets power and data over one cable. An injector is cheaper than a whole PoE switch when only one or two devices need feeding. PoE has two power modes. Mode B sends power over the spare pairs (4,5 and 7,8), Mode A over the same pairs that carry data (1,2 and 3,6). Most IP cameras, Dahua's included, accept either, but the device and the injector must agree.
- Output voltage: 48 V DC
- Power: 24 W (0,5 A)
- Power mode: Mode B — 4,5 (+) and 7,8 (−)
- LAN port: gigabit RJ45
- Operating temperature: 0 °C to +40 °C
- Placement: indoor
- Brand: Ubiquiti
| Network device type: | Injector |
|---|
Ubiquiti – radio links and UniFi networks
Ubiquiti is best known for its wireless products: airMAX and airFiber links take the network where cable cannot go. The UniFi line applies the same logic to wired networking and Wi-Fi.
Why Ubiquiti?
A radio link instead of cable – you can connect two buildings or yards without digging. In surveillance this is often the only sensible way to get a distant camera back to the recorder.
Unified UniFi management – access points, switches and routers in one controller, with a network map and monitoring.
Built for outdoors – most of the radio hardware is designed for a mast or a wall and copes with a Nordic climate.
We stock both point-to-point links and UniFi network gear. With any radio link, remember it needs line of sight — if there is forest or a building in the way, a stronger antenna will not fix it.
Login