TP-Link TL-SG1218MP 18-port Gigabit rackmount switch • 16× PoE+ 250 W • 2× Gigabit uplink + 2 SFP
€176.80
Product "TP-Link TL-SG1218MP 18-port Gigabit rackmount switch • 16× PoE+ 250 W • 2× Gigabit uplink + 2 SFP"
TP-Link TL-SG1218MP is an 18-port gigabit rackmount switch where 16 ports deliver PoE+ within a 250 W budget. No configuration required — connect the cameras and the recorder and it works.
Key Advantages and Features:
- 16 PoE+ gigabit ports: a 250 W budget shared across ports 1–16 (802.3af/at) — cameras, PTZs and wireless access points
- Gigabit on every port: unlike 10/100 PoE switches, the port is not the bottleneck even for a high-bitrate 4K camera
- 2 uplinks + 2 SFP: two non-PoE gigabit ports for the recorder and two combo SFP slots for fibre
- Plug and play: no configuration needed
- 19-inch rack, 1U: two fans, metal chassis
- 36 Gbps switching capacity: every port can run at full speed at once
Technical Specifications:
| Parameter | Specification |
|---|---|
| PoE ports | 16 × Gigabit RJ45 (802.3af/at), ports 1–16 |
| Uplink ports | 2 × Gigabit RJ45 (non-PoE) |
| SFP slots | 2 × combo Gigabit SFP |
| PoE power budget | 250 W |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3af, 802.3at, 802.1q, 802.1p |
| Switching capacity | 36 Gbps |
| MAC address table | 8 K |
| Jumbo frame | 10 KB |
| Power supply | 100-240 V AC, 50/60 Hz |
| Power consumption | 21.4 W (no PD), 286.6 W (with 250 W PD) |
| Heat dissipation | 73.0 BTU/h (no PD), 977.4 BTU/h (with 250 W PD) |
| Fans | 2 |
| Mounting | 19-inch 1U rack |
| Dimensions | 440 × 180 × 44 mm |
| Certifications | CE, FCC, RoHS |
Suited to powering and connecting up to 16 PoE cameras to a recorder. Since every port is gigabit, growing camera counts or bitrates will not outgrow the port.
| PoE: | With PoE |
|---|---|
| Ports: | 16 |
| Port speed: | Gigabit |
TP-Link – networking from home to enterprise
TP-Link is one of the world's largest networking manufacturers. Our range focuses on the Omada business line: managed switches, PoE switches and Wi-Fi access points that are configured centrally from a controller.
Why TP-Link?
Central Omada management – every access point and switch is configured from one interface, either an on-site controller or the cloud. On a large site that means you stop configuring device by device.
PoE throughout – the switch powers both cameras and access points, so there is no need to run separate power to each device.
A wide range of price points – the same family covers a small office and a fully managed network, without compatibility gaps.
For surveillance work TP-Link is above all the part that carries camera video to the recorder: switches, PoE and site Wi-Fi.
Login