€18.60
Enquire about delivery
Product "Pulsar EXT-POE3 PoE Extender 1"
A PoE extender that lengthens the permitted cable run and splits one input into 3 outputs. Ethernet gives up at 100 metres — the extender draws power from the input, regenerates the signal and passes both on. It needs no separate supply.
- PoE input: 1 × gigabit PoE (uplink)
- PoE outputs: 3 × PoE
- Speed: 10/100 Mbit/s väljundil, 10/100/1000 Mbit/s sisendil
- Added distance: 100 m
- Mounting: DIN rail
- Power: self-powered from PoE
- Placement: indoor or a weatherproof enclosure
- Brand: Pulsar
| PoE: | With PoE |
|---|---|
| Ports: | 3 |
| Port speed: | 10/100 Mbps |
Pulsar – Polish power solutions for security systems
Pulsar is a Polish manufacturer specialising in power for CCTV and alarm systems: switch-mode power supplies, battery-backed units, PoE devices and steel installation enclosures.
Why Pulsar?
Power built for this job – the supplies are made for cameras and alarm systems rather than general use: the right voltage, the right connectors, an IP rating suitable for a junction box.
Backup built in – battery-backed supplies keep the system running through a power cut — for an alarm system that is a requirement, not an extra.
Matching enclosures – lockable steel boxes with tamper switches that fit the power supply and the hardware properly.
Pulsar is an installer's range: most of it is meant for a cabinet, a junction box or a wall, not a desk.
Login