Skip to main content Skip to search Skip to main navigation

Media converter - 10Base-T, 100Base-FX Fiber SC Media Converter 100Base-TX UTP to 100Base-FX

Product "Media converter - 10Base-T, 100Base-FX Fiber SC Media Converter 100Base-TX UTP to 100Base-FX"

TP-Link MC220L is a Gigabit media converter joining fibre to copper. The SFP slot means the same unit works with either multi-mode or single-mode fibre — you just fit the right module.

Key Advantages and Features:

  • Fibre to copper: links 1000Base-SX/LX fibre with a 10/100/1000Base-T copper network
  • SFP slot: an interchangeable module — the same unit handles multi-mode or single-mode fibre
  • Long distance: up to 0.55 km on multi-mode and up to 10 km on single-mode fibre
  • Flexible installation: standalone on a desk or inside an MC1400 chassis
  • Status LEDs: front-panel LEDs show link and traffic status

Technical Specifications:

ParameterSpecification
StandardsIEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX
Interfaces1 × SFP slot and 1 × 10/100/1000 Mbps RJ45
Wavelength850 nm on multi-mode, 1310 nm on single-mode fibre
Distanceup to 0.55 km (multi-mode), up to 10 km (single-mode)
SFP modulenot included — choose according to the fibre type
Mountingstandalone or in an MC1400 chassis

Best suited for: a fibre link between two buildings, a long run, or an electrically noisy environment where copper is unsuitable. The SFP module is not included — order it separately to match the fibre type and distance.

Properties "Media converter - 10Base-T, 100Base-FX Fiber SC Media Converter 100Base-TX UTP to 100Base-FX"
Network device type: SFP module
Datasheets
Andmeleht (PDF)

Oops! Your browser doesn't support PDFs!

Manufacturer "TP-Link"

TP-Link – networking from home to enterprise

TP-Link is one of the world's largest networking manufacturers. Our range focuses on the Omada business line: managed switches, PoE switches and Wi-Fi access points that are configured centrally from a controller.

Why TP-Link?

  • Central Omada management – every access point and switch is configured from one interface, either an on-site controller or the cloud. On a large site that means you stop configuring device by device.

  • PoE throughout – the switch powers both cameras and access points, so there is no need to run separate power to each device.

  • A wide range of price points – the same family covers a small office and a fully managed network, without compatibility gaps.

For surveillance work TP-Link is above all the part that carries camera video to the recorder: switches, PoE and site Wi-Fi.

Related links of the manufacturer

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.