€1,061.44
Not in stock — available for pre-order. We will reply with the exact delivery time and a quote.
- Ordered before 14:00 from our Tallinn warehouse — dispatched the same business day
- Collection from our Tallinn warehouse is always free — delivery options and prices
- 14-day right of return for private customers
- Need advice? +372 6715042
Product "EAST EA903PHRT Online UPS 3000VA (2700W), 19" rack 2U + 96 V battery cabinet (AT-UPS3000RT-RACK)"
EAST EA903PHRT is a 3000 VA / 2700 W double-conversion (online) UPS supplied with a separate battery cabinet. The set is two 2U units: the UPS itself and a 96 V battery cabinet holding eight batteries. With the batteries in their own enclosure the runtime is far longer than on a model with internal batteries, and they can be replaced without opening the UPS.
Key Advantages and Features:
- True double conversion: The output is rebuilt continuously, so mains sags, frequency drift and noise never reach the load. Transfer from mains to battery takes 0 ms.
- Wide input range: Works from 110–300 V and 40–70 Hz — the battery is only used when the mains is genuinely gone, which preserves battery life.
- Easy on the mains: Active power factor correction keeps the input power factor up to 0.99 and distortion below 6 %.
- ECO mode: Up to 97 % efficiency in ECO mode — less heat and a smaller electricity bill.
- Cold start: Starts from battery alone with no mains present — useful when the power is already out before the equipment is switched on.
- LCD menu and RS232: Output voltage, EOD, auto-start and bypass mode are set from the LCD. RS232 is standard; USB, RS485, dry contacts and an SNMP card are optional.
- Separate battery cabinet: The 96 V cabinet (8 × 12 V) is its own 2U enclosure — longer runtime and battery replacement without opening the UPS.
- Fast charging: The long-run model charges at up to 6 A, so a large battery bank refills in reasonable time.
- Two 2U units: Both are 19-inch rack sized, 4U in total.
Technical Specifications:
| Parameter | Specification |
|---|---|
| Type | Online double conversion (VFI), transformerless |
| Capacity | 3000 VA / 2700 W (output power factor 0.9) |
| Input voltage | 208 / 220 / 230 / 240 V AC; range 110–300 V |
| Input frequency | 40–70 Hz (auto-sensing) |
| Input power factor | ≥ 0.99; THDi ≤ 6 % |
| Output voltage | 208 / 220 / 230 / 240 V AC (settable on the LCD), ± 1 % |
| Output waveform | sine wave; THDv ≤ 2 % (linear load), ≤ 5 % (non-linear) |
| Overload | 105–125 % for 1 min, 125–150 % for 30 s, over 150 % for 300 ms |
| Transfer time | mains to battery 0 ms; inverter to bypass 4 ms |
| Communications | RS232 (standard); USB, RS485, dry contacts, SNMP (optional) |
| Display | LCD + LED |
| Protections | short circuit, overload, overtemperature, battery discharge, fan failure |
| Noise level | ≤ 50 dB at 1 m |
| Working temperature | 0–40 °C; humidity 0–95 % (non-condensing) |
| Protection rating | IP20 |
| Standards | EN 62040-1, EN 62040-2, EN 61000-3-2, EN 61000-3-3, IEC 62040-1/-2 |
| Efficiency | ≥ 92 % mains mode, ≥ 87 % battery mode, ≥ 97 % ECO mode |
| Batteries | in a separate cabinet, 96 V (8 × 12 V); charging current up to 6 A |
| Outputs | 2 × Schuko (CEE 7/3) |
| Dimensions (W × D × H) | UPS 440 × 468 × 88 mm + battery cabinet 440 × 468 × 88 mm (two 2U units, 4U in total) |
| Packaged | 830 × 525 × 180 mm (single box) |
| Weight | 32 kg (34.6 kg packaged) |
For cases where 2 kVA is not enough or the runtime has to be more than a couple of minutes — a server rack, a comms node, a control room. Plan for two units: 4U of rack space in total and 32 kg.
| Product type: | UPS |
|---|
Login